Category
Introduction
High speed and performance with syncro-drive
Description
THE FUTURE IN LABEL WEAVING FIELD
MEI WISHES TO INTRODUCE THE STATE OF THE ART IN LABEL WEAVING
MEI Air-Jet: Compact size, efficency and top performance in yarn handling, the highest production rate with high qualitywoven labels, easy manteinance and low operating costs with new syncro-drive system, costant electronic monitoring onits parts with Fast-Ethernet technology, reduced air consumption and more precise adjustment of main nozzles, with newvalves control, new automatic filling threading process for main nozzles, minimizing the import of power trasmission onthe surface of yarn, with efficiencies and performance improvement. The entire communication, with control and process,is effect via Fast-Ethernet, guaranteeing new developments in electronics and drive technology, for best performance ofthe machine, even giving the possibility to record all production data via USB.
Characteristics
Brand labels machine MEI AirJet A1 with compact or syncro-drive
Mei model MEI - DA17 / TER / S1-S2 (T-S) L
Loom brand DORNIER A1 with FT control version
Speed 900 rpm. - up to 1.050 rpm.
Nominal width 1.800 mm. - 1.500 mm.
Reed width 1.600 mm. - 1.200 mm.
Weft insertion From 1.260 up to 1.440 (meters per minute) depending on pattern
Repeats 8x20 - 4x40 cm. each; 6x20 - 3x40 cm. each; on demand also “Jumbo” SPECIAL big format
Number of colours 8 colours
Overall dimension Height 4.100 mm. - lenght 5.100 mm. - width 1.800 mm.
Warp density 54.6 - 109.2 - 149.7 ends per cm. while other densities upon request
Weft yarns Polyester from 20 den to 200 den; other yarns also on weaving
ErgoWeave panel High level of machine intelligence since all elements involved controlled by new micro processor
Automatic filling repair AFR No manpower required to restart the loom after weft stops. Efficiency highly increased,
and fewer operators per looms are required during production.
Electronic filling insertion EFT To reduce yarn stress during filling insertion and therefore to reduce breacks down.
Electronic warp let-off motion EWL To facilitate high quality productions the warp let off system is controlling filling density and operating speed. The system ensure costant quality and prevent start marks.
Thermal cutting system Patended MEI “Super Soft Selvedges” with rivets.
MEI ironing system New “top calendaring” system on breast beam for a perfect “soft taste” finishing mode
MEI labels tension control By supplementary brush-less motors to ensure costant ribbons tension.
Power consumption 10 kw/h (at running condition)
Air consumption From 80 to 90 cubic meters per hour at 3/3,5 bar pressure
Arrival line pressure 7,5 bar
Maintenance Extremely reduced with most extreme clutch-brake unit user-friendly set up concept on loom
Gantry New on loom designed, with special iron alloy for less vibrations and long-life mode
Jacquard Bonas and Staubli
Harness With springs pull down
News Compact or Syncro motor version / new drive concept FT compact / new servo-control /
new single-hole relay nozzles and high dynamic back-rest roller device.
Documents
Images
