Brand labels machine MEI Air Jet Dreamline
Mei model MEI – TAJ17 / TER / S1-S2 (T-S) L
Loom brand TOYOTA
Speed Up to 900 rpm. max
Nominal width 1.800 mm.
Reed width 1.600 mm.
Weft insertion Up to 1.200 meters per minute
Repeats 8x20-4x40 cm. each; on demand also “jumbo” SPECIAL format is available
Number of colours 8 colours
Overall dimension Height 4.100 mm. - lenght 5.100 mm. - width 1.900 mm.
Warp yarns Polyester 30-100 den
Weft yarns Polyester from 20 den to 200 den; other yarns also on weaving
Warp density 54.6 - 109.2 ends per cm. while other densities upon request
Control board Touch screen, menu guide easy to consult, with a quick Control and diagnosis of all loom functions
Control panel High level of machine intelligence since all elements involved controlled by
microprocessor and WAS (weave assist system) from Toyota
Automatic filling repair No manpower required to restart the loom after weft stops. Efficiency highly increased,
and fewer operators per looms are required during labels production
Electronic filling insertion To reduce yarn stress during filling insertion and therefore to reduce breaks down
Warp let-off motion To facilitate high quality productions, the warp let off system is controlling filling density and operating speed. The system ensure costant quality and prevent start marks
Thermal cutting system Patented mei “Super Soft Selvedges” with rivets
Mei ironing system New top calendering system on breast beam
Weft feeders Special TOYOTA weet feeders
Mei labels tension control By supplementary brush-less motors to ensure costant ribbons tension.
Power consumption 10 kwh (at running condition) - 18 kwh (at start-up)
Air consumption From 60 to 80 cubic meters per hour at 3/3,5 bar pressure
Arrival line pressure 7 bar
Maintenance Extremely reduced with most extreme direct-drive unit user-friendly set up concept
Gantry New on loom designed, with special iron alloy, for less vibrations and long-life mode
Jacquard Bonas and Staubli
Harness With springs pull down